How to clean and remove stains from porcelain stoneware floors

How to clean and remove stains from porcelain stoneware floors


Find out how to clean porcelain stoneware: which products to use, which products not to use and tips to make the covering last longer.

Even porcelain stoneware, one of the most adopted and considered materials in projects high resistenceNeed Proper cleaning and maintenance to ensure its technical and aesthetic characteristics. Ceusa provides suggestions on how to take care of this product and extend its useful life much longer.

Cleaning porcelain stoneware floors




To prolong the beauty and durability of the coatings, the frequent cleaning It is essential. It is recommended to perform dry cleaning with vacuum cleaner or soft bristle broom. For light dirt, a neutral detergent diluted in water it’s enough.

In cases of more stubborn dirt, the use of the creamy concentrated soap (concentrated floor soap) applied with a blue or white sponge is recommended. If there is dirt, the Alcoholic vinegar can be applied pureleaving him act for ten minutes before removing it.

For non-slip products, it is best to wash with a creamy soap and a hard bristle brush, as this cleaning is more intense. For this reason, non-slip porcelain stoneware should only be used in uncovered outdoor areas, where water can be used for cleaning.

Removing stains from porcelain stoneware



Expo Revestir 2024: the main launches in porcelain stoneware and ceramic tiles

Some substances can make porcelain stoneware dirtier and cannot be removed with daily cleaning. However, using the appropriate product it is possible to remove them without damaging the coating. O white spirit vinegarfor example, combined with creamy soapprovides efficient cleaning, Removal of filler, grease and aluminum stains.

Whenever possible, it is essential to clean the surface of the coating immediately after contact with the substance. In the case of wine stains, for example, it is best to remove them as soon as possible to ensure more effective cleaning.

Products not recommended for porcelain stoneware

Products such as oven cleaner, tile cleaner, aluminum cleaner, solvent, thinner, stone cleaner, keroseneamong others that contain acid and have the skull symbol on the packaging, should never be used to clean ceramic coatings as they will damage the product. These products can cause loss of shine and occasional or sequential dull spots. The chemical attack is irreversible and the only solution is to remove or replace the damaged parts.

Extend the life of the coating

To prolong the useful life and beauty of your covering, some precautions are essential. It is recommended cover furniture legs with carpet or felt to avoid damage to the coating.

The use of doormats It is also recommended on doors that have a direct connection to the street, as it helps remove excess abrasive dirt from shoes.

Furthermore, it is important Avoid dropping heavy or sharp objects which could cause chipping in the enamelled surface of the coatings. Keeping the coatings always clean and free from abrasive dirt that could scratch the product is an essential practice to ensure its durability over time.

Further information



Expo Revestir 2024: the main launches in porcelain stoneware and ceramic tiles

To ensure proper maintenance of your ceramic tiles, the Bleach should always be diluted in wateruse a ratio of three parts water to one part bleach. If there are deep scratches that can be felt when running a fingernail, it is necessary to replace the damaged piece to maintain the integrity and aesthetics of the coating.

Source: Terra

You may also like