How to Get Rid of Condensation and Mold on Windows: 5 Easy Ways

There is no special dryer for windows, but there is a device that will save the entire apartment from mold and damp – this is a dehumidifier. Home dehumidifiers are compact, quiet and often come with additional functions such as cleaning, fragrance and ionization. A similar device costs from three to 50 thousand rubles, the most economical option is the simplest: it will only perform its main task. Ready to spend some money? Then, using dehumidifiers to reduce condensation on windows is the way to go.

What if there is no money to install humidity sensors to control and prevent condensation? Just check out the pet supplies section! Recently, on the page of British cleaning guru Mrs. Hinch, subscribers were discussing anti-mold window products, and many said that they were saved by ordinary litter for trays – it had to be poured into socks cotton and placed on the windowsill.

“One of the most effective ways to combat condensation is to improve air circulation,” says Mohammed Ahmed, creator of home improvement advice site The Home Guidance. He advises not to forget about ventilation of rooms to reduce condensation on windows, as well as the possibility of using ventilation to avoid condensation: if installing a window fan is not possible, place -an ordinary one on the windowsill. Or watch this video: it turns out that two computer fans can solve the problem!

As Mohammed explains, good insulation can also prevent condensation. It is on this principle that the windows are covered with special anti-condensation films: glued to the inside of the glass, they reduce heat loss and prevent the accumulation of humidity.

Blinds and curtains will also help to insulate windows: they will create a protective barrier between the glass and the warm air in the room and prevent condensation from forming. But compared to the film, curtains have a significant disadvantage: why not keep them closed all day in winter, when there is so little light?

And finally, consider installing insulation around the windows to avoid condensation: for this you no longer need to cut newspapers, self-adhesive insulation can be purchased in any market. Using silicone seals on windows also helps with insulation, but remember that seals wear out over time and need to be replaced every two to three years.

Does constantly blowing and wiping the windows to remove condensation seem annoying? Save yourself the hassle with houseplants: some of them literally suck moisture out of the air. Plant Bible founder Zahid Adnan advises paying attention to these:

Don’t limit yourself to just one flower: place several on the windowsill, creating a mini-zone to eliminate excess moisture. Don’t forget to take care of your plants: their leaves must always be clean.

Finally, remember to clean and maintain your window frames and glass regularly to prevent mold and condensation. Moisture won’t harm your home if you remove it immediately, so just grab a rubber glass scraper and an old towel and get rid of it. Do you want it to never appear? An excellent solution would be to use electric heaters or heated glass to prevent condensation.

Read also: How to wash windows: simple but effective methods

Black, green, orange, yellow… Whatever the color of the mold, you don’t want it to take hold in your home. Let’s see what remedies will help get rid of them!

Using vinegar-based products to remove mold from windows is a cleaning classic and also very economical. You don’t even need to prepare the solution, but just pour vinegar into a spray bottle, spray it on the “sick” area of ​​​​the window and after 30 minutes wash it off with clean water.

If the windows are heavily overgrown with fungus, try another method: removing mold on windows using acetic acid products. Add 200 ml of acetic acid at a concentration of 70% and 200 ml of boron at a concentration of 99.9% to one liter of water.

Apply a layer of solution to the mold with a brush, let it penetrate, then add another layer. Wait half an hour, wash the window with a damp sponge, dry it and apply a third layer of solution – it is not necessary to wash it (but you definitely need to ventilate the room).

Using hydrogen peroxide products to remove mold on windows is no less effective than vinegar, and this substance can be used on any surface. Apply 3% peroxide solution to the affected area using a spray bottle, after 10-15 minutes, wash and wipe dry with a dry cloth.

Removing mold from windows with baking soda is another simple trick: fill a spray bottle with half a liter of water, add a tablespoon of baking soda, shake, and when the powder is dissolved, spray it solution on the mold and let it dry. After that, the window must be washed with clean water and dried.

If we talk about the use of products based on cleaning powders to remove mold on windows, we cannot fail to mention borax – the sodium salt of boric acid. Add a glass of powder to two and a half liters of water, apply the solution with a stiff brush or broom to the mold, wait half an hour, rinse, then apply the solution again and let it dry – from this way, the fungus will disappear. will not reappear again.

They can be used to prevent the appearance of mold: place a diffuser of rosemary and thyme esters on the window – they can destroy spores directly in the air. Using essential oils to remove mold on windows is even simpler: apply a few drops to the mold colony, scrub with a brush, wait 10 minutes, then wipe away the residue with paper towels.

Not all ethers are deadly in terms of mold – you need:

Even more interesting materials can be found in our Telegram channel.