House cleaning: find out how to remove stains from every type of floor

House cleaning: find out how to remove stains from every type of floor


Ceramic, porcelain, laminate, stone and wood: the expert gives advice on how to clean and ensure maximum shine

When finishing cleaning with the rag it is necessary to pay attention to the different types of coverings to ensure that they remain well cared for in the future, after all each material requires specific care and products. Thinking about this, Anielle Pazianassociate researcher at Industrial Reckittbrand manufacturer I waithas collected some tips for cleaning some of the most common types of floors:

Ceramic or porcelain




These floors are known for their easy daily maintenance. Only one wet mopping and the use of all-purpose cleaners, disinfectants and intensive cleaning products to eliminate most stains on these materials. For more demanding cleaning, avoid using bleach and prefer a quick-drying disinfectant. You also need to pay attention to the use of abrasive materials that can scratch the ceramic: give preference to those microfibre, flannel or cotton cloths. Scented detergents can be used to complete the cleaning, ensuring the scent lasts longer and neutralizing bad odors.

Wood



Project by Hugo Rapizo Arquitetura.

Like all coverings made from natural materials, wood also requires particular attention when cleaning. If the floor is sealed with varnish it becomes water resistant, otherwise it is necessary to be careful and dry the floor well when cleaning to prevent the planks from absorbing moisture and ending up swelling and ruining. In any case, use a specific detergent for wooden surfaces, Lightly moisten a soft cloth and clean the floor. To restore the shine of the wood, a liquid wax specific for this material after cleaning.

Laminate



Project by Júlia Guadix.

This type of flooring usually simulates wood and is quite easy to care for. But be careful: just like wood, It cannot be washed because it could be damaged if it comes into direct contact with water. Avoid the use of concentrated or pure products, prolonged contact and do not leave the floor wet after applying the product. A slightly damp cloth and a scented all-purpose cleaner will leave the floor clean. Products specifically for laminate and vinyl are a great option to restore the natural shine of the floor.

Marble or granite



Project by DB Architetti.

Despite being resistant, these floors can be ruined due to the continuous use of very concentrated or acidic products. Prefer disinfectants or specific products for heavy cleaning (removing the most difficult dirt) instead of “homemade mixtures”. Use a microfibre cloth moistened in cold water with the product you prefer. For maintenance, use scented detergents daily.

Source: Terra

You may also like